Repair. Rule. Repeat.

This essential set lets you adjust, tighten, or fine-tune most components on your bike.

Easily check the wear on your drivetrain. 

This tool helps you know if you only need to replace your chain, or if it's time for both a new chain and cassette.

Use this to tighten or swap out your bike pedals.

Perfect for removing a tire from its rim, making tube and tire changes a breeze.

Easily remove and reattach your chain using the quick link found on many bike chains.

This tool is for removing your bike chain. You'll reattach it with a quick link.

Precisely cut all your bike's brake and derailleur cables and housing.

Install or remove your freewheel with this tool, an 8mm Allen key, and its adapter.

Mount or dismount your cassette using this cassette remover, the chain whip, an 8mm Allen key, and its adapter.

Tighten or loosen your spoke nipples to adjust tension and correct any wheel wobbles.

Change a chainring on your crankset using this wrench and an Allen key.

Specific to Shimano cranks, this tool allows you to extract them from the bottom bracket using a 6mm Allen key.

Remove your crank arm, for example, to replace your bottom bracket.

Remove or install your bottom bracket with this tool and, if needed, one of the two adapters.

Mount or dismount your bottom bracket using this tool, an 8mm Allen key, and its adapter.

This tool helps straighten disc brake rotors to correct wobbles. It also allows you to spread brake pads within the caliper.

This wrench is designed for tightening or loosening bike wheel hubs.